Further information
page
2
Security settings
(
0#5120
)
•
SIM PIN state
(
0#51210
) - Use to specify whether the SIM PIN is
required. If enabled, the SIM PIN will be required every time the
unit is powered up or logged on.
If the SIM PIN is incorrectly entered, the number of tries remain-
ing (3 in total) is displayed. If the number of tries expires, the PUK
(PIN Unblocking Code - available from your service provider) will
be required and this must be entered using the
.
•
Change SIM PIN
(
0#51220
) - Allows a new SIM PIN to be set. The
old PIN is first requested followed by the new PIN, which also
needs to be repeated. If the OLD PIN is incorrectly entered, the
security measures apply (as described above).
•
Terminal PIN state
(
0#51230
) - Specifies whether the terminal PIN
is required. The terminal PIN is used to prevent unauthorised use
of the terminal and also for remote monitoring and control func-
tions. If the terminal PIN is enabled, the unit will request the PIN
when power is applied or if the
are being used.
•
Change terminal PIN
(
0#51240
) - The old terminal PIN must be
entered correctly, then the new PIN needs to be entered twice
before it is accepted. The PIN is fixed to 4 digits in length and is
set at manufacture to
234
•
Auto SIM unlock
(
0#51250
) - When enabled, the unit can auto-
matically unlock the SIM at each startup (the SIM PIN must be
manually entered once after enabling).
continued
Menu options (explanations)
This section provides explanations for all of the menu options that
are not dealt with elsewhere within this guide. Where options are
covered in other sections, the adjacent links will take you straight to
the relevant pages:
Phonebook
(
0#10
Messages
(
0#20
Call register
(
0#30
for details.
Mobile network divert
(
0#410
for details.
Forward landline
(
0#420
for details.
Settings
(
0#50
) - See below:
Terminal settings
(
0#510
)
•
Display contrast
(
0#5110
) - Allows you to adjust the display to suit
your surrounding. Use the and
#
keys to change the contrast of
the display and press
0
to save the setting.