Operation
page
0
Using the Phonebook
The Phonebook uses your SIM card to store the names and numbers
of your contacts. You can add, edit, erase, search and dial those
stored details using a minimum of keypresses.
Phonebook contacts are listed alphabetically with the exception of
the first nine entries, which are reserved for speed dialling your most
commonly used numbers.
To add an entry
1 Lift the phone handset and dial
0#120
. The display will show:
2 You can now either:
• Use one of the first nine (speed dial) memory locations: Press
a key between
1
and
9
. If the location is already taken, the
display will show the name and ‘Replace?’. Press the
0
key to
proceed (or press to go back a step).
or
• Use the next vacant standard memory location: Press the
#
key.
The display will show:
3 Using the phone’s keys in a similar manner to
, enter
the name of your contact and then press the
#
key.
The display will show:
4 Enter the full phone number of your contact and then press the
#
key.
Note: For entering international numbers, see
The entry will be stored within SIM card memory.
To call a standard phonebook entry
1 Lift the phone handset and dial
0#110
. The display will show:
2 You can now either:
• Scroll through the list: Press the
#
key to display the first
memory location.
or
• Search by name: Press the phone key containing the first letter
of the contact’s name (if necessary, press the key repeatedly to
display the correct letter). The display will show the first entry
that has the chosen letter.
3 Use the phone keys as follows to scroll down, up or dial:
#
to scroll down the list by one place,
to scroll up the list by one place,
0
to dial the entry that has the flashing cursor.
To call a speed dial phonebook entry
1 Lift the phone handset.
2 Press and hold a key (between
1
and
9
) for roughly one second.
3 Release the key. After a short pause the display will show the
name of the chosen entry:
4 Press the
0
key to dial the chosen contact, otherwise hang up and
start again to choose a different contact.
