Operation
page
9
Operation
This section covers the features of the Burnside
unit that you will use on a regular basis, such as:
Ü
Making and receiving calls
Your Burnside unit is designed to make the attached telephone
operate as it would do if connected directly to a landline.
To make a call
1 Lift the handset and listen for the dial tone.
2 Dial the required number. Three seconds* after the final number is
entered, the call will be placed.
Note: For calls that use the mobile phone link, you must use the
full dialling code for all calls, even to those in your local area. On
‘L’ models (which have an additional landline connection), it is
best practice to also use the full dialling code as calls may be
directed via either connection method.
* The standard three second dial delay can be changed using
menu
0#5220
to a period between 1 second and 1 minute. When
entering a phone number, you can optionally press the phone’s
#
key to begin the dialling process immediately.
To make an international call
1 Lift the handset and listen for the dial tone.
2 Press and hold the phone’s zero key until ‘+’ appears on the dis-
play of the Burnside unit.
3 Dial the standard international code for the required country (e.g.
‘44’ for the UK, ‘33’ for France, etc.) and then dial the required
phone number (omit the initial zero of the area code, as usual).
To end a call
1 Replace the handset. No other action is required.
To make a speed dial call
1 Lift the handset and listen for the dial tone.
2 Press the required speed dial number between 1 and 9, then
press the
#
button. The display will show the name of the phone-
book entry stored at the chosen speed dial location and ask for
confirmation to dial.
3 Press the
0
key to dial.
To receive a call
When the phone rings, lift the handset and take the call in the usual
manner.
If the caller’s number is declared by the network, it will be shown
on the display of the Burnside unit and also that of the phone (if the
phone supports the Caller ID feature).
Note: You can disable outgo-
ing Caller ID using menu
0#5240
- see
for details.
If the ‘Allow reject’ option is enabled on the Burnside unit (menu
0#5250
- see
for details), lift the handset and then press
the phone’s
0
key to accept the call.
• Making and receiving calls
•
•
•
•
Marker
