Installation
page
Setting the internal clock
The internal clock of the Burnside unit keeps accurate time and is
maintained by an internal battery during power failures. The battery
is automatically charged while the unit is switched on (approximately
two days to reach full charge) and will last roughly thirty days without
a power input.
Note: Date stamping for landline calls is provided by the landline
caller ID mechanism. Caller ID from the incoming mobile side uses
the Burnside unit clock. To avoid confusion, ensure that the unit
clock is correctly set using the method shown here.
To set the internal clock
1 Lift the phone handset and dial
0#550
. The display will show:
2 Press the
0
key to confirm. The display will show:
3 Using the phone keypad, enter the day, month and year. After the
sixth digit is entered, the display will show:
4 Enter the current time in hours, minutes and seconds. After the
sixth digit is entered, the display will return to the clock menu and
the information will be saved.
