manualshive.com logo in svg

Burnside T9 series, Руководство пользователя

Поделиться
Скачать
Burnside T9 series Скачать руководство пользователя страница 34

Contents

Introduction

Operation

Further information

Installation

Index

page 

33

To configure the unit for GPRS

If your SIM supports it, you can connect to the internet using the 
higher speed GPRS (General Packet Radio Service) connection. 
This will provide data rates typically between 40 to 60 kbps, de-
pending on network congestion, signal quality and other variables. 
Contact your service provider for details. To use GPRS, an additional 
modem initialisation command is required:  
1  Open the Windows Control Panel (

Start > Control Panel

) and run 

‘Phone and Modems Options’. Change to the Modems tab, high-
light the entry named ‘Standard 19200 bps modem’ and click the 
Properties button.

2  Click on the Advanced tab and edit the ‘Extra initialization com-

mands’ field:

  Enter 

at+cgdcont=,ip,

xyzinternet

  where 

xyxinternet

 is specified by your service provider.

  This special command will not interfere with operations when us-

ing the same installation for standard modem and fax.

2  Click OK to save and then click OK to exit the ‘Phone and Modem 

Options’ dialog box.

3  Within the Windows Control Panel, run the Network Connections 

option. Run the New Connection Wizard and select the following 
options as you work through it: ‘Connect to the Internet’ > ‘Set up 
my connection manually’ > ‘Connect using a dial-up modem’ > 
Choose the new ‘Standard 19200 bps modem’ > Enter a con-
nection name > Enter ‘

*

99

***

#

’ as the phone number > Enter 

Internet account information from your ISP > Finish.   

4  When the ‘Connect 

ispname

’ dialog is displayed, click the Proper-

ties button to display the following:

Use this button to make 
sure that the ‘Maximum 
speed’ is set to 115200. 
Also, select ‘Enable 
hardware flow control’

5  Click the Configure button. Ensure that the ‘Maximum speed’ op-

tion is set to 115200 and also ensure that the ‘Enable hardware 
flow control’ option is ticked. 

6  Click OK to save and exit. 

Ensure that the Phone 
number is set to 

*

99

***

1#.

Содержание T9 series
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды