Burnside T9 series Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 47

background image

Operation

Further information

page

23

Network call features

Note: The availability of these options are dependant on the SIM
card and service provider. If a service is not provided, a message
such as “operation not supported” or “ss not executed” where ss
means Supplementary Service.

Call diverting

These call divert options control the service provided by your mobile
network, which will transfer incoming voice calls to a separate phone
number when the Burnside unit cannot take calls (for a variety of
different reasons). The various divert options are not mutually exclu-
sive, so you can arrange different or the same divert numbers for
any or all conditions, as required. Each divert option has three sub
menus:

Status

,

Activate

and

Cancel

.

When activating a divert, a destination number must be either en-
tered or chosen from the phonebook. This number is then registered
with your network provider.
When cancelling a divert, the previously registered number will be
retained by the network. When reactivating the same divert, you will
be given the choice to continue with the registered number or delete
it and replace it. To just delete it, hang up after deleting.
•

Divert all

- dial

0#4110

- All voice calls will be diverted.

•

Divert when busy

- dial

0#4120

- Voice calls will be diverted when

the phone is busy.

•

Divert no answer

- dial

0#4130

- Voice calls will be diverted if not

answered within 20 seconds.

•

Divert when off

- dial

0#4140

- Voice calls will be diverted when-

ever the unit is switched off or unavailable. See also

•

Cancel diverts

- dial

0#4150

- Call diverting will be disabled.

Call waiting

When call waiting is supported by your network and enabled (see
menu codes below or

Star hash codes

), a call waiting situation will

occur if an incoming call is received while the unit is engaged in an
existing call. When this happens, the number or name (if identified
in the phonebook) will be displayed with “Waiting” shown and also a
short tone can be heard in the handset.
•

Show status

- dial

0#53210

- Indicates the current setting.

•

Activate

- dial

0#53220

- Enables the call waiting feature, subject

to network support.

•

Cancel

- dial

0#53230

- Disables the call waiting feature.

When enabled and a new call is received, you have the following
options:
• Ignore the tone and message, and wait until the caller either

hangs up or is diverted to voicemail, if enabled.

• Press the recall button on the phone (or quickly tap the hook

switch). The display will show “Accept & hold?” with the waiting
number/name on the second line. Either:
• Press

0

to place the original call on hold and accept the new

call, or

• Press

#

to display “Reject?”. Then press

0

to reject the waiting

call and return to the original call. Alternatively, press

#

to re-

display the “Accept & hold?” prompt, or

• Press the recall button (or quickly tap the hook switch) to return

to the original call.

«
...
22
23
24
25
26
...
»

Содержание T9 series
















































Отзывы:

Нет отзывов

Похожие инструкции для T9 series

Бренд: Beckhoff Страницы: 19

Бренд: Daikin Страницы: 10

Бренд: Partner Страницы: 54

Бренд: b&c data system Страницы: 42

Бренд: AB Quality Страницы: 20

L-force E94AZJEA

Бренд: Lenze Страницы: 6

Бренд: Axon POS System Страницы: 46

TT-3000LRIT mini-C

Бренд: Thrane&Thrane Страницы: 35

Бренд: adyen Страницы: 5

Бренд: adyen Страницы: 6

Бренд: Selesta Страницы: 6

Бренд: XAC Страницы: 5

Бренд: PAX Страницы: 64

Бренд: SkyWave Страницы: 70

Бренд: Fametech Страницы: 29

Бренд: Uniwell Страницы: 239

REL 551-C1 2.3 Series

Бренд: ABB Страницы: 116

Бренд: Bluebird Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды