Page 2 of 20
INTRODUCTION
Thank you for choosing this burley product. All of our products carry a CE mark which is awarded
by an independent test house (notified body) and shows the fires have been type tested to meet
the essential requirements of the European Gas Appliance Directive and the appropriate British
Standards.
A thermostat in the burner control system adjusts heat output to maintain a room temperature,
which can easily be set by the user. There is also a separate control to adjust the flame effect as
required. Please demonstrate its operation to the customer before leaving.
An oxygen depletion sensing pilot light is also fitted and will sense any significant oxygen
depletion in the room and shut the fire down safely.
DUE TO THE SENSITIVE NATURE OF THE OXY PILOT, IT IS NOT UNUSUAL FOR THE PILOT TO
EXTINGUISH UP TO/AFTER 1 MINUTE WHEN FIRST LIT. RELIGHT AND THE PILOT WILL STAY
ALIGHT. THIS IS DUE TO THE MOIST GASES FORMED BY THE PILOT DROPPING DOWN AND
SNUFFING IT AS WELL AS THE COLD METAL WORK. IT IS SAFE TO LEAVE THE PILOT ON 24
HOURS A DAY TO MAKE LIGHTING EASIER.
BURLEY APPLIANCES IS THE ONLY COMPANY TO BENCH RUN AND THOROUGHLY TEST EVERY
SINGLE GAS FIRE IT PRODUCES. BURLEY IS IN THE UNIQUE POSITION OF KNOWING THAT EVERY
APPLIANCE LEAVES THE FACTORY IN PERFECT WORKING ORDER.
Fireguards
A fireguard is not supplied with this appliance; however it is recommended that a
fireguard to BS6539 or BS6778 is fitted if the fire is to be used in the presence of young children,
the elderly and the infirm.
Gas appliances must be installed in accordance with the rules in force. In the UK it is the law that
all gas appliances must be installed by a Gas Safe™ registered installer (formerly CORGI), in
accordance with the Gas Safety (Installation and Use) regulations (as amended). The installation
must also be in accordance with the relevant parts of local and national building regulations and
in accordance with BS5871 pt4 except where Burley instructions state differently. For the
Republic of Ireland, reference should be made to IS813 and ICP3 and any guidance notes from
Bord Gais. Failure to have the fire fitted by a qualified person nullifies
ALL
guarantees.
Declaration of Conformity
Burley Magiglo Ltd. declares that the appliance described in “Technical data” conforms to the
following standard(s) BS EN 14829: 2007
Efficiency Declaration
This appliance has a thermal efficiency of 100% giving an Energy Efficiency Index of 91%. This is
A
rated on all variants/options & emits less than 130mg/kWh NOx.
