9
I Englsih
secuENTRY HOME 5000 CYL
Changing the user access medium - KeyApp as electronic radio key
Tap the relevant line (Fig. 60) to delete
the entry.
A message will then appear prompting
you to confirm (Fig. 61). Tap on "
OK
".
Now you can enter another another
KeyApp as an electronic key or another
access medium. To do this, follow the
chapter "Create user and assign an
access medium" on page 4.
1
2
3
Fig. 61
Delete user
1
2
Proceed as follows to delete a user:
Open the main menu (Fig. 60).
Tap on the menu item
"secuENTRY setup"
(Fig. 61).
Tap on
"User administration"
in the
submenu (Fig. 62).
A list of users is displayed. Swipe the
entry of the user you wish to delete to
the left (I) and tap on the "DELETE" field
(II) that appears on the right (Fig. 63).
3
4
Fig. 62
Fig. 63
Fig. 60
Fig. 61
Programming/updating the cylinder
The cylinder must be programmed
accordingly so that the registered users
can now open the lock with the stored
opening options. Program the cylinder
as follows:
Open the main menu (Fig. 64).
Tap on the menu item
"secuENTRY setup"
(Fig. 65).
Tap on
"Programming"
in the submenu
(Fig. 66).
The list of programming files appears.
This is where the required changes are
generated in programming files and
collected for sending to the cylinder. By
default, the list is empty because there
is no collection. If there are still earlier
programming files in the list, delete
them by sliding the respective entry
from right to left (Fig. 67).
Tap the "+" at the top right to add your
required changes or the corresponding
cylinder to the list (Fig. 68).
1
2
3
4
5
Fig. 66
Fig. 68
Fig. 64
Fig. 65
Fig. 60
I
II
Fig. 67