13
I Englsih
secuENTRY HOME 5000 CYL
Battery status display and replacing the batteries
The battery status is shown on the dis-
play each time a secuENTRY cylinder is
activated via the KeyApp (Fig. 97). When
the batteries in the cylinder are running
low, replace them as soon as possible.
Attention:
The batteries are located
in the cylinder knob on the
inside
of
the door. Please note that if you ignore
the battery status and the battery is
completely discharged,
you will no
longer be able to open the lock from
the outside.
Instructions on replacing the batteries
are given below:
On the inside of the door at the front
end of the knob, remove the screw
with the TX8 screwdriver provided and
remove the front cover (Fig. 98).
Remove the old batteries and dispose
of them appropriately (Fig. 99).
Tip:
Instructions for proper disposal can
be found on page 14 of this manual.
Insert two new batteries.
Make sure that the polarity is correct
according to the drawing (Fig. 99).
Replace the front cover and screw it on
tightly (Fig. 100).
Fig. 97
Fig. 101
Fig. 102
!
!
2
3
4
1
Fig. 98
Fig. 99
Fig. 100
Whether for one front door, several doors or a complete locking system: Simply configure your
individual unit with the secuENTRY modular system .
Your
ENTRY HOME 5000 CYL
cylinder can be extended with the following components:
secuENTRY
ENTRY 7711 Keypad PIN
Using the
ENTRY 7711 Keypad PIN
, you
can unlock and lock the door with a
6-digit user code. The transmission is
wireless via Bluetooth and is 128-bit
AES encrypted.
secuENTRY
ENTRY sE-Key 7713
The cylinder is opened simply by
pressing a button using the
ENTRY
sE-Key 7713
radio key. The transmis-
sion is encrypted at a high security
level (AES encryption).
Compatibility with other secuENTRY products
Article number:
4003482507117
Further info available
on our website:
www.burg.biz
Article number:
4003482507131
Further info available
on our website:
www.burg.biz
