manual-rmp210-rmp3545-en-18
Page
6 / 16
Intended Use
The multilayer presses RMP 210 and RMP 3545 are used for the production of multilayers in an in-
dustrial-type equivalent frame.
All other applications require our written consent or at the user's own risk.
Safety Regulations
General
Please read the following text carefully and pay particular attention to the instructions on work safety
and on commissioning.
Please keep these instructions carefully. It contains instructions that are also important for later
maintenance or cleaning work.
The machines are not intended for integration or interconnection with other machines or equipment.
They may only be operated in rooms equipped for this purpose and only operated by qualified spe -
cialist staff. Children and pets are to be kept away!
Transport
Only use suitable lifting and transport equipment such as forklift trucks or pallet trucks. Secure the
machine against slipping / tilting. Attention, high center of gravity!
Transport machine only vertical! Do not carry horizontal by any means!
Installation site
The machine must stand level and there must be sufficient space for operation and maintenance.
The installation environment is critical to the trouble-free work with the RMP. You must therefore
pay special heed on a dust-free room and an atmosphere free of corrosive vapours to ensure
proper functioning.
Electrical connection
The machine is manufactured using tested parts in accordance with the usual electrical safety regu -
lations. However, this does not relieve the user of his duty of care when handling electrically oper -
ated devices.
The red main switch disconnects the machine from the power supply. We assume a proper building
installation including ground earth, current breaker (RCCB) and suitable fuses.
After completing the work, always turn off the main switch.
Before carrying out any work on the machine (cleaning, etc.), switch off the machine and pull out the
mains plug.
Work safety
The machine is equipped with a door safety switch. When the door is opened, the compressed air
for the press is deactivated.
This can destroy your multilayer circuit, but it is an important security feature of this machine.
Please check the function of the position switch regularly.
Machine may only be used with press plates in the press unit.
Personal protective equipment
When handling hot parts wear protective gloves. The safety instructions of the manufacturer or the
safety instructions of the supplier must be observed.
Temperature
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]
