manual-rmp210-rmp3545-en-18
Page
2 / 16
Preface
RMP 210 and RMP 3545 - Multilayerpresse
This high performance multilayer press was designed for PCB labs to enable quick prototyping of
multilayer PCBs according to industry standards. The number of layers is only limited by the max -
imum lift of the press compartment.
A compact and floor standing aluminium rack contains all parts of the unit including pressure sup-
ply, press plates and heaters. The large loading door that allows quick and easy access to the
pressure part is of course security switch protected.
A compressor, which is integral part of RMP series is stored in the back of the machine. In the
front, you will find additional storage room for tools or boards (lower door). the unit is controlled by
two digital and adjustable thermostats, one digital timer as well as a pressure valve with pressure
meter. Two strong air ventilators activated automatically during cooling cycle.
Steps of multilayer production with RMP 210 / RMP 3545:
•
•
boards are pinned and stack is inserted into press plates
•
pressure is created
•
heater is activated
•
heating up procedure
•
press procedure at preset temperature
•
cooling down under pressure
•
PCB stack is taken out of the machine
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]
