Buffalo TeraStation III TS-IXL Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 65

background image

TeraStation III iSCSI User Manual

58

Errors and Warnings

Displays the current status when changing the settings or formatting drives.

Examples of LCD

Meaning

SYSTEM Error

E00

MPU No Response

The system is not responding. Disconnect power for 10 seconds, then reattach
and boot the TeraStation. If the error persists, contact tech support.

DRAM LINES

E01

DATA Failure

IC error. Contact tech support.

DRAM LINES

E02

ADDRESS Failure

IC error. Contact tech support.

RTC Chip

E03

No RTC Clock

Clock error. Disconnect power for 10 seconds, then reattach and boot the
TeraStation. If the error persists, contact tech support.

SYSTEM Error

E04

Can't Load Krnl!

The firmware is corrupted. Contact tech support for assistance.

WDT

E05

SYSTEM Stopped

System hung. Disconnect power for 10 seconds, then reattach and boot the
TeraStation. If the error persists, contact tech support.

TFTP MODE

E06

Lost boot image

The firmware is corrupted. Wait for 5 minutes. If "E04" appears on the display,
turn off the unit. Contact tech support for assistance.

HD ALL E07
ALL HD Not Found

Hard disks are not found. If the drives are installed but this message appears,
contact Buffalo’s tech support for assistance.

UPS

E10

Dependent Mode

Power outage. The TeraStation is running on UPS battery power and will be shut
down safely.

SYSTEM I10
TOO HOT!

System temperature is above safe limits. Move the TeraStation to a cooler place.
Do not place anything too close to the TeraStation that might block airflow.

SYSTEM Error

E11

Fan Failure

The fan is not spinning. Check for dirt or objects caught in fan. Remove any
debris with tweezers or canned air. If the error persists, contact tech support.

SYSTEM Error

E12

Cooling Failure

System temperature is above safe limits. Move the TeraStation to a cooler place.
Do not place anything too close to the TeraStation that might block airflow.

RAID Error

E13

ARRAYx Error

An error has occurred in the Xth RAID array. The system will run in degraded
mode if RAID1 or RAID5 is used. For best results, test the drives individually and
replace the defective drive.

RAID Arrayx

E14

Can't Mount

The Xth RAID array could not be mounted. Turn off the TeraStation, then reboot
it. If the error persists, rebuild the RAID array. If the error still persists, contact
Buffalo’s tech support for assistance.

HDx Error

E15

Many Bad Sectors

The bad sectors in the Xth hard drive have become serious. Replace the drive.

HDx Error

E16

HDx Not Found

Cannot find the Xth hard drive. The Xth hard drive may not be connected or may
be damaged. Check the drive and replace if necessary.

«
...
57
58
59
60
61
...
»

Содержание TeraStation III TS-IXL


































































Отзывы:

Нет отзывов

Похожие инструкции для TeraStation III TS-IXL

Бренд: Cambium Networks Страницы: 29

Бренд: Ice-O-Matic Страницы: 9

Бренд: Xblue Networks Страницы: 148

grand Hard Disk

Бренд: LaCie Страницы: 2

Бренд: QNAP Страницы: 321

ProLiant DL180 Gen10

Бренд: HPE Страницы: 10

Бренд: Overland Storage Страницы: 6

Бренд: 8level Страницы: 52

Бренд: Lantech Страницы: 49

9123710 - eServer OpenPower 710

Бренд: IBM Страницы: 70

Бренд: TerraMaster Страницы: 13

D-Link DSL-2640U

Бренд: Broadband Products Страницы: 12

AssuredSAN 4004 Series

Бренд: Dot Hill Страницы: 59

88743BU - System x3950 E

Бренд: IBM Страницы: 426

Бренд: RackSolutions Страницы: 8

MaxAttach NAS 4000

Бренд: Maxtor Страницы: 2

Бренд: AC&T System Страницы: 32

x3350 - System - 4192

Бренд: IBM Страницы: 98

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды