Buffalo TeraStation III TS-IXL, Руководство пользователя

Страница: 23 / 65

TeraStation III iSCSI User Manual 22
Using RAID 10 mode
1
Delete any preexisting array as described in “Using Normal mode” on page 19.
2
3
4
5
Note:
Building the RAID array will take about 10 hours per TB of drive space. During this time, the LCD will display “RAID
ARRAY x Resyncing” and file transfers will be slower than usual. Do not turn off the TeraStation until the array is
built, or the process will start over at reboot.
6
The [Confirm Operation] screen will appear. Enter the displayed number and click [Apply] within 60 seconds to
continue.
7
Follow the instructions displayed on the screen.
You have configured a RAID 10 array. Refer to page 15 to create a volume on the array. Use [Disk Management] on
Windows to format the volume, then connect to the formatted volume with the iSCSI Hard Disk Connection Tool and
use it as a local drive on your computer.
Select all four hard drives.
1 Select [RAID 10].
2 Click [Create Raid Array].
In the Web Admin interface, navigate to [Basic] - [Storage] - [RAID Array].
Choose the array you want to configure.