Buffalo TeraStation III TS-IXL, Руководство пользователя

Страница: 26 / 65

TeraStation III iSCSI User Manual 25
Configuring a Hot Spare
A hot spare will automatically replace a failed drive in a RAID array. You must have an extra drive to configure a hot
spare, so it is only usable with a RAID 5 array of 3 drives or a RAID 1 array. Configure a hot spare as follows.
Note:
When you change a drive from normal mode to a hot spare, or from a hot spare back to normal mode, all data on the
drive is lost. Back up any important data on the drive before changing settings.
1
2
3
Note:
You can change a hot spare drive to a normal drive by clicking [Set to normal disk].
4
The [Confirm Operation] screen will appear. Enter the displayed number and click [Apply] within 60 seconds to
continue.
5
Follow the instructions displayed on the screen.
You have configured a hot spare.
Click an array which is set either RAID 5 or RAID 1.
Click [Set to spare-disk].
In the Web Admin interface, navigate to [Basic] - [Storage] - [RAID Array]