Buffalo TeraStation III TS-IXL, Руководство пользователя, Страница: 27 / 65

TeraStation III iSCSI User Manual 26
Chapter 6
Access Restrictions
Configuring Access Restrictions for the TeraStation
1
2
3
4
Turn back on [iSCSI Service] again.
Note:
Access Restrictions by Mutual Authentication
•Use the following settings to set access restrictions by mutual authentication in addition to the normal access
restrictions:
In the screen shown in step 3, check [Mutual Authentication] for [Access Control] and set any password you want for
[Password (Mutual Authorization)]. Select [Mutual Authorization] for [User Authorization]. The screen to enter the
mutual authentication password will open. Enter the password you set.
You’ve configured access restrictions for the TeraStation.
1 Click [Enable].
2 Enter [Username] and [Password].
3 Click [Save].
You may configure access restrictions for the TeraStation, or for individual volumes on it. When access restrictions are
set, a username and password are required to connect to the TeraStation with the iSCSI Hard Disk Connection Tool.
1 Navigate to [Basic] - [Security] - [Access Control (Whole System)].
Turn off [iSCSI Service] on the left side of the Web Admin interface.
2 Click [Modify Settings].