Buderus Logano G315 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 56

background image

2

Product description

Logano G315 – 6 720 817 939 (2017/02)

5

2

Product description

The oil/gas-fired boiler Logano G315 has been developed and built
employing the latest technologies and safety regulations.

Particular emphasis is placed on ease of operation. Please observe the
safety instructions and the operating instructions to ensure optimum
safe, economical and environmentally-friendly utilization of your
system.

The main components of the Logano G315 oil/gas-fired boiler are:
• Boiler block (



The boiler block transfers the heat generated by the burner to the
boiler water.

• Boiler shell (jacket



Fig 1 and 2, [1]), thermal insulation (



[2])
The boiler jacket and thermal insulation minimize energy loss.

• Control panel (



The control panel is designed to monitor and control all electrical
components of the oil/gas-fired boiler Logano G315.

Fig. 1

Oil/gas-fired boiler Logano G315

[1]

Boiler shell (jacket)

[2]

Thermal insulation

[3]

Boiler heat exchanger

[4]

Control Panel Assembly

Fig. 2

Front jacket

[1]

Boiler shell (jacket)

NOTICE:

Risk of system damage from use of incorrect

burner.
▶ Only use burners that meet the technical

requirements of the oil/gas-fired boiler Logano
G315 (



chapter 3, page 8).

Observe all standards and guidelines applicable to the
installation and operation of the system in your country.
Please observe the information on the boiler rating plate.
These are definitive and must be observed.

To prevent boiler contamination, we recommend
installing a dirt trap in the water system.

As a basic rule, flush existing systems before connecting
the boiler.
Install a desludging unit in the boiler return to prevent
damage to the boiler.

1

4

2

1

3

6 720 642 622-01.1o

6 720 642 622-02.1o

1

1

Fuels

Logano G315

Heating oil

Liquid propane (LPG)

Natural Gas (NG)

Remarks

The Logano G315 boiler can be operated with the specified fuels. Select a burner suitable for use with the fuels specified for the Logano

G315 boiler.

The output figures shown in the Table “Technical Data” are nominal power figures.

Carry out maintenance and cleaning procedures annually. Check that the entire system is functioning correctly.

Immediately remedy faults.

If heating oil is used, shorter maintenance intervals may be necessary depending on the operating time.

Table 2

«
...
3
4
5
6
7
...
»

Содержание Logano G315

























































Отзывы:

Нет отзывов

Похожие инструкции для Logano G315

Бренд: Ravenheat Страницы: 4

Бренд: Demir Dokum Страницы: 80

ecoVIT exclusiv VKK 226/4-H

Бренд: Vaillant Страницы: 16

ecoFIT sustain 415

Бренд: Vaillant Страницы: 52

Бренд: Unical Страницы: 76

Vitodens 100 Series

Бренд: Viessmann Страницы: 112

Бренд: ECOFOREST Страницы: 140

Бренд: Unical Страницы: 52

Бренд: Unical Страницы: 72

Бренд: Unical Страницы: 80

Бренд: BRÖTJE Страницы: 168

Бренд: Marco Страницы: 1

SureFlow Compact Series

Бренд: Instanta Страницы: 8

Бренд: Baxi Страницы: 8

Бренд: Immergas Страницы: 32

BRAVA One HE 25

Бренд: Sime Страницы: 108

Бренд: Immergas Страницы: 16

EVO-COOL CS 1300

Бренд: Viessmann Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды