manualshive.com logo in svg

Buderus Logano G315, Инструкция по установке и обслуживанию

Buderus Logano G315 - надежный и эффективный котел для вашего дома. Получите подробное руководство по установке и обслуживанию с помощью бесплатного руководства по инструкциям по установке и обслуживанию. Скачайте его с manualshive.com и наслаждайтесь комфортом и теплом вашего дома.

Поделиться
Скачать
background image

 

Contents

Logano G315 – 6 720 817 939 (2017/02)

2

About this manual

This installation and maintenance instructions contain important 
information for the safe and proper installation, initial start-up and 
maintenance of the oil/gas-fired boiler Logano G315.

These installation and maintenance instructions are designed for 
specialists, who, due to their vocational training and experience, are 
knowledgeable in handling heating systems and oil and gas installations.

The oil/gas-fired boiler Logano G315 is available in two variants 
(disassembled and assembled).

These installation and maintenance instructions explain the installation 
and maintenance of both boiler types.

Contents

1

Key to symbols and safety instructions   . . . . . . . . . . . . . . . . . .  3

1.1

Key to symbols  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3

1.2

General safety instructions   . . . . . . . . . . . . . . . . . . . . . . .  4

2

Product description  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

2.1

Designated use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

2.2

Operating conditions  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

2.3

Compliance with standards and regulations . . . . . . . . . .  6

2.4

Additional regulations for installations in 
the Commonwealth of Massachusetts   . . . . . . . . . . . . . .  7

3

Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

4

Scope of delivery   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10

4.1

Logano G315 - delivery as a pre-assembled block   . . .  10

4.2

Logano G315 – delivery unassembled  . . . . . . . . . . . . .  10

5

Transporting the boiler  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10

6

Positioning the boiler   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11

6.1

Tools and auxiliary materials  . . . . . . . . . . . . . . . . . . . . .  11

6.1.1

Boiler assembly tool size 2.3 . . . . . . . . . . . . . . . . . . . . .  11

6.2

Recommended wall clearances  . . . . . . . . . . . . . . . . . . .  11

6.3

Installing the boiler on a boiler base or foundation   . . .  12

7

Boiler block assembly   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12

7.1

Assembly of a boiler block from sections  . . . . . . . . . . .  13

7.2

Joining the boiler block assembly 
(delivery unassembled)    . . . . . . . . . . . . . . . . . . . . . . . .  13

7.3

Setting up the boiler block (assembled block)  . . . . . . .  16

7.4

Sliding the supply pipe into place  . . . . . . . . . . . . . . . . .  17

7.5

Sealing the immersion sleeve   . . . . . . . . . . . . . . . . . . . .  17

7.6

Leak test  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17

7.6.1

Carrying out leak test  . . . . . . . . . . . . . . . . . . . . . . . . . . .  17

7.6.2

Sealing leaks  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18

7.6.3

Supply flange with safety components, return flange   .  18

7.7

Boiler water connections  . . . . . . . . . . . . . . . . . . . . . . . .  19

7.8

Installing fittings and burner door  . . . . . . . . . . . . . . . . .  20

7.8.1

Positioning the draft diverter . . . . . . . . . . . . . . . . . . . . .  20

7.8.2

Screwing cleanout cover onto rear section . . . . . . . . . .  20

7.8.3

Inserting the flue gas baffle plates . . . . . . . . . . . . . . . . .  20

7.8.4

Fitting burner door panel  . . . . . . . . . . . . . . . . . . . . . . . .  20

7.9

Boiler outer casing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21

7.9.1

Fitting the profile rails   . . . . . . . . . . . . . . . . . . . . . . . . . .  21

7.9.2

Attaching the thermal insulation  . . . . . . . . . . . . . . . . . .  21

7.9.3

Fitting side panels and top covers . . . . . . . . . . . . . . . . .  22

The appliance has been tested to meet all national 
requirements in effect on the date of manufacture. The 
conformity has been confirmed. The corresponding 
documentation and the original Declaration of 
Conformity are on file with the manufacturer.

Содержание Logano G315

























































Отзывы:

Нет отзывов

Похожие инструкции для Logano G315

U.S. Range Salamander Broiler Installation And Service Manual preview
Salamander Broiler
Бренд: U.S. Range Страницы: 52
Ferroli PEGASUS F2 102 Installation And Maintenance Instructions Manual preview
PEGASUS F2 102
Бренд: Ferroli Страницы: 24
Navien NFC-200 Quick Installation Manual preview
NFC-200
Бренд: Navien Страницы: 4
Duco DucoBox Eco Boiler Control Installation Manual preview
DucoBox Eco Boiler Control
Бренд: Duco Страницы: 12
Alarko CGS2 Series User Manual preview
CGS2 Series
Бренд: Alarko Страницы: 68
Brute MagnaTech BMGH1600 Installation And Operation Instructions Manual preview
MagnaTech BMGH1600
Бренд: Brute Страницы: 116
KYOWA KW-3901 Instruction Manual preview
KW-3901
Бренд: KYOWA Страницы: 3
Sime AQUA HE 25 ErP BE Installer'S Instructions preview
AQUA HE 25 ErP BE
Бренд: Sime Страницы: 96
Sime 8115300 User, Installation And Servicing Instructions preview
8115300
Бренд: Sime Страницы: 104
Potterton Gold Combi 24 HE A Installation & Service Instructions Manual preview
Gold Combi 24 HE A
Бренд: Potterton Страницы: 64
Ferroli ECONCEPT 50 A Installation And Operating Instructions Manual preview
ECONCEPT 50 A
Бренд: Ferroli Страницы: 36
Unical ALKON 70 kW Installation And Servicing Manual preview
ALKON 70 kW
Бренд: Unical Страницы: 52
Wolf SPU-2 Assembly Instructions Manual preview
SPU-2
Бренд: Wolf Страницы: 40
Wolf SPU-1-200 Installation Instructions Manual preview
SPU-1-200
Бренд: Wolf Страницы: 44
Wolf COB Technical Manual And Installation Instructions preview
COB
Бренд: Wolf Страницы: 80
Wolf COB-2 Operation Instructions Manual preview
COB-2
Бренд: Wolf Страницы: 96
Wolf SPU-1-200 Assembly Instructions Manual preview
SPU-1-200
Бренд: Wolf Страницы: 104
Fer FERSYSTEM TECH 31 C Instructions For Use, Installation And Maintenance preview
FERSYSTEM TECH 31 C
Бренд: Fer Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды