Buderus 800-24, Инструкции по установке и обслуживанию

Страница: 63 / 68

Reports 7
Installation and servicing instructions condensing gas boiler 800 - 24/29/43/60 and 800 - 24T25/29T25 H/V • edition 02/2006 63
Subject to modifications resulting from technical improvements ! Buderus • http://buderus-domestic.co.uk
7 Reports
7.1 Start-up report
z
Please check off the start-up tasks carried out and enter the corresponding readings, while making sure that you carefully follow
the instructions.
Initial start-up tasks Remarks or measurement readings
1. Note down gas characteristics:
Wobbe index
Operational heat value
––––––––––––––––––––
kWh/m³
––––––––––––––––––––
kWh/m³
2. Has a leak test been carried out?
(see chapter 2.1.5 on page 23)
3. Check combustion air/flue gas connection
4. Check the boiler equipment (change to another type of gas if
necessary)(see chapter 2.2.1 on page 24)
5. Carry out adjustment settings
(see chapter 2.2.2 on page 25)
6. Measure the gas supply pressure (flow pressure)
(see chapter 2.2.3 on page 27)
––––––––––––––––––––
mbar
7. Check and set the gas/air ratio
CO
2
-content: under full load
under partial load
(see chapter 2.2.4 on page 28)
––––––––––––––––––––
Pa
––––––––––––––––––––
%
––––––––––––––––––––
%
8. Check for leaks with system in operational condition
(see chapter 2.2.5 on page 30)
9. Record readings
Flow pressure
Exhaust-gas temperature, gross t
A
Air temperature t
L
Flue temperature, net t
A
- t
L
Carbon dioxide (CO
2
) or oxygen (O
2
) content
Exhaust-gas losses q
A
Carbon monoxide content (CO), free from air
(see chapter 2.2.6 on page 30)
––––––––––––––––––––
Pa
––––––––––––––––––––
°C
––––––––––––––––––––
°C
––––––––––––––––––––
°C
––––––––––––––––––––
%
––––––––––––––––––––
%
––––––––––––––––––––
ppm
10. Testing the operation
Measure the ionisation current
(see chapter 2.2.7 on page 30)
––––––––––––––––––––-
µA
11. Fit the boiler casing
(see chapter 2.2.8 on page 31)
12. Instruct the user, hand over the documentation
(see chapter 2.2.9 on page 31)
13. Confirm commissioning (see Benchmark )
Confirmation of professional commissioning
(Company stamp, signature)