13
MOUNTING BELT / DISC SANDER TO WORKBENCH
ADJUSTING DISC TABLE SQUARE WITH SANDING DISC
ADJUSTING BELT TABLE SQUARE WITH SANDING BELT
1. Place the sander on a surface that is level but also provides enough room
on all sides for the workpiece and for the operator (or bystanders) to not be
standing in line with the wood while using the tool. Allow room for the belt to be
positioned horizontally or vertically.
2. The hardware to mount this sander is NOT supplied with the sander.
1. Using a combination square (1), place
one side of the square on the disc
table (2) with the other side against the
sanding disc (3), and check to see if the
disc table is 90° to the disc.
2. If the disc table surface is not 90° to the
disc, loosen the table lock knob (4), adjust
table square with disc and tighten the
table lock knob (4).
3. Loosen the screw (5) and secure the
scale pointer (6) at 0°.
NOTE: The disc table (2) can be tilted from 0° to 45° by loosening the table
lock knob (4). Tilt the disc table (2) to the desired angle. Tighten table
lock knob (4).
1. Using a combination square (1), place
one side of the square on the belt
table (2) with the other side against the
sanding belt (3), and check to see if the
belt table is 90° to the belt.
2. If the belt table surface is not 90° to the
belt, loosen the table lock knob (4), adjust
table square with belt and tighten the
table lock knob (4).
3. Loosen the screw (5) and secure the
scale pointer (6) at 0°.
NOTE: The belt table (2) can be tilted from
0° to 45° by loosening the table lock
knob (4). Tilt the belt table (2) to the
desired angle. Tighten table lock
knob (4).
BD4603
OPERA
TING INSTR
UCTIONS
1
4
5
6
2
3
1
2
3
4
5
6
Содержание BD4603
Страница 2: ......
Страница 20: ...BD4603 19 EXPLODED VIEW...