background image

 Specifications                                                                    2  

                                                                                    

3

SAFETY GUIDELINES

       SAFETY GUIDELINES - DEFINITIONS

 Always wear safety goggles or safety glasses with side shields.

• Always wear respiratory and hearing protection.

• To reduce the risk of injury, user and all bystanders must read and understand 

   instruction manual before using this product.

• Failure to keep your hands away from the moving part and cutting surface will 

  result in serious personal injury.

• No children or pregnant women should enter the work area where the paint 

  sanding is being done until all clean up is completed. 

• A dust mask or respirator should be worn by all persons entering the work area. 

  The filter should be replaced daily or whenever the wearer has difficulty breathing.

• NO EATING, DRINKING or SMOKING should be done in the work area to prevent 

  

ingesting contaminated paint particles. Workers should wash and clean up BEFORE

 

  eating, drinking or smoking. Articles of food, drink, or smoking should not be left in 

  the work area where dust would settle on them.

• Paint should be removed in such a manner as to minimize the amount of dust 

  generated. 

• Areas where paint removal is occurring should be sealed with plastic sheeting 

  of 4 miles thickness.

• Sanding should be done in a manner to reduce tracking of paint dust outside the 

   work area.

• All surfaces in the work area should be vacuumed and thoroughly cleaned daily 

   for the duration of the sanding project. Vacuum filter bags should be changed 

   frequently.

• Plastic drop cloths should be gathered up and disposed of along with any dust 

  chips or other removal debris. They should be placed in sealed refuse receptacles 

  and disposed of through regular trash pick-up procedures. During clean up, 

  children and pregnant women should be kept away from the immediate work area.

• All toys, washable furniture and utensils used by children should be washed 

  thoroughly before being used again.

Use of this tool can generate and/or disperse dust, which may cause serious 

and permanent respiratory or other injury. Always use NIOSH/OSHA approved 

respiratory protection appropriate for the dust exposure. Direct particles away 

from face and body.

BD4603

WARNING!

!

Содержание BD4603

























Отзывы: