Bucktool BD4603, Инструкция по эксплуатации

Страница: 12 / 24

11
INSTALLING WORKTABLE ON DISC
INSTALLING WORKTABLE ON BELT
The worktable can be used with both the sanding disc and the belt. It should be
used to support workpieces in all sanding operations except inside curve
applications.
1. Place the worktable (1) onto the disc
sander frame, aligning the semi-circular
slot (2) with the threaded hole (3).
2. Place the washer (4) on the shaft of
worktable lock knob (5), insert through
semi-circular slot (2), and tighten into
threaded hole (3).
3. Adjust worktable to level or any angle
between 0° and 45° for sanding.
1. Loosen the inner hex screw (1) using the 5 mm hex key, and raise the belt
bed (2) in the 90 degree vertical position. Tighten the inner hex screw (1).
2. Place the worktable (3) onto the belt sander frame, aligning the semi-circular
slot (4) with the threaded hole (5).
3. Place washer (6) on the shaft of worktable lock knob (7), insert through s
emi-circular slot (4), and tighten into threaded hole (5).
4. Adjust worktable to level or any angle between 0° and 45° for sanding.
BD4603
OPERA
TING INSTR
UCTIONS
1
2
3
4
5
1/16 in. (1.6 mm)
6
1
2
7
3
4
6
5