Buchi Rotavapor R-250 Pro Скачать руководство пользователя страница 18

Страница: 18 / 78

3 | Product description

Büchi Labortechnik AG

18/78

Operation Manual Rotavapor® R-250 Pro

3.5.2

Ambient conditions

For indoor use only.

Max. altitude above sea level

2000 m

Ambient and storage temperature

5 ‒ 40 °C

Maximum relative humidity

80% for temperatures up to 31 °C
decreasing linearly to 50 % relative hu-
midity at 40 °C

3.5.3

Materials

Housing

Stainless steel 1.4301 (AISI 304)

Gear head

Aluminum cast (3.2373)

Painting

Powder coated with Epoxy (EPX)

Bath pan

Stainless steel 1.4404 (AISI 316L)

Heating element

Stainless steel 1.4404 (AISI 316L)

Glass

Borosilicate 3.3

In contact with product

FDA approved materials

3.5.4

Installation site

The installation site has a firm, level surface.

The installation site meets the requirements for the connected devices. See
related documentation

The installation site meets the safety requirements. See Chapter 2 "Safety",
page 7

The installation site meets the specifications according to the technical data (e.g.
weight, dimension, etc.). See Chapter 3.5 "Technical data", page 17

The installation site is not exposed to external thermal loads, such as direct solar
radiation.

The installation site has no obstacles (e.g. water taps, drains, etc.).

The installation site has enough space that cables / tubes can be routed safely.

The installation site allows that the power supply can be disconnected at any time
in an emergency.

The installation site meets IEC / EN 61326-1 for industrial and basic
electromagnetic environments.

The installation site has a power supply with line system impedance Z max of 0.27
+ j0.17 Ohms or less to which the instrument is connected.

Содержание Rotavapor R-250 Pro















































































Результаты поиска

Содержание Rotavapor R-250 Pro

Отзывы:

Похожие инструкции для Rotavapor R-250 Pro

Бренды по названию

Популярные бренды

Buchi Rotavapor R-250 Pro, Руководство по эксплуатации

Результаты поиска

Содержание Rotavapor R-250 Pro

Отзывы:

Похожие инструкции для Rotavapor R-250 Pro

Бренды по названию

Популярные бренды