btsr MATRIX CUBE, Руководство по эксплуатации

Страница: 98 / 129

DIAPER FEEDER Device
MATRIX CUBE - 78 -
Programming the DIAPER FEEDER Devices
The DIAPER FEEDER device offers two programming environments:
1)
SIMPLE
(allows programming exclusively the device main tension)
2)
ADVANCED
(allows programming all the device parameters)
To get access to the programming environment, press and hold down for 3 seconds the
ENTER button, while the device is operating in Control environment.
If you keep the button pressed for less than 3 seconds, the device Firmware version will
temporarily appear on the display.
To switch from
SIMPLE
to
ADVANCED
and viceversa, press and hold down for 3 seconds the
ENTER button.
To avoid undesired changes of operating parameters, after the installation of DIAPER
FEEDER devices and after having setup and checked all the working parameters in
ADVANCED
programming environment, it is advisable to activate the
SIMPLE
programming environment, so that when the operator will subsequently enter the
programming environment, he/she will only have the possibility of changing the main
tension (1
st
variable of P1).
General Diagram of Simple Programming Environment
(A) LFA = Length of Absorbed Yarn in m/min