BTG Pulptec SBT-2400, Руководство пользователя

Страница: 33 / 80

4.2 - Operations with JCT-1200
M2041/5en SBT-2400 Operating Instructions 27
©BTG 2006
4.2.7 Remove Sample Values
1. Press the Menu (F1) key, step down through the menu tree to the Lab cal-
ibration window.
2. Select a sample and press Edit (F3) .
If sample is active, select the * with the -> (F2) key and deactivate by press-
ing On/Off (F3) .
3. Remove the Sample value and press Delete (F3) .
4. Press OK (F1) .
4.2.8 Change Offset
1. Press the Menu (F1) key, step down through the menu tree to the Basic
calibration window.
2. Select Offset and press Edit (F3) .
3. Enter the offset value. Press OK (F1) .
4.2.9 View Diagnostics
1. Press the Menu (F1) key, step down through the menu tree to the Diag-
nostics window.
2. View the transmitter’s internal temperature, the maximum temperature ex-
posed to the transmitter, the software version, running hours and the num-
ber of transmitter start-ups.
4.2.10 Set JCT Display Light Time
1. Press the Menu (F1) key, step down through the menu tree to the General
settings window.
2. Select the LcdBackLight option. Press Edit (F3) .
3. Enter the number of seconds the JCT display shall stay lit after the last but-
ton is pressed. Press OK (F1) .
NOTE!
If the LcdBackLight option is set to anything but zero, the light will be
activated when a button is pressed. The first time a button is pressed, the
display is lit; the second time a button is pressed, the function of the button is
activated
NOTE!
If a JCT with power supply is used, the display will be lit at all times.