BTEK T419S, Руководство по обслуживанию

Страница: 63 / 136

T419S Indicator Service Manual 63
7.1 SMA Protocol
7.1.6 Extended SMA Commands
<LF>XA<CR> This will initiate an Accumulate command. It will perform
an Accumulation transaction if all required conditions
are met.
The port that initiated the command will also receive an
<LF>xa<CR> response.
<LF>XB<CR> This will initiate a PRINT command. The command will
also perform the same function as pressing the
PRINT
key on the front panel.
No response.
<LF>XK<CR> This will return a list of up to the last twenty keys
pressed. The buffer is cleared after this command.
<LF>xk:Y<CR> where Y is:
T for TARE key
S for SELECT key
Z for ZERO key
P for PRINT key
U for UNITS key
F for F1 key
G for START key
H for STOP key
I for ID key
L for TARGET key
J for SAMPLE key
K for SETUP key
N for UNDER key
O for OVER key
C for CLEAR
R for REPORT key
Q for IN/OUT key
E for FLEET key
. for Decimal key
# for all numeric keys
<LF>XC<CR> This will return the audit counters in this format:
<LF>Calib:xxx:Config:yyy:<CR>
The list above includes all the keys for all the various models of Z indicators. If your
model of indicator does not have one of these keys, that key will not be included in the
returned list.
XD, XZ and XS commands, below, only work if the indicator is unsealed.