BT In Touch 2000 ~ Edition 03 ~ 01.03.05 ~ 6692
23
“No mains power”.
“Emergency call. Please enter the
3-digit code”.
Status announcements
If your BT In Touch 2000 detects either no mains
power or low batteries on the phone or the Pendant,
then it will convey this information to the called
number as part of the emergency announcement,
for example:
“Emergency call”.
(Plus any personal emergency
announcement you have recorded).
Warning alerts
If you hear one of the emergency warning alerts,
such as “No mains power” ,
“Please change batteries”
or
“Telephone line disconnected”
then you must take
the necessary action to rectify the problem.
If you hear “No mains power”
The back-up batteries will automatically take over for
the duration of their battery life (up to 7 hours for
new batteries). The mains power should be
reconnected as soon as possible and the batteries
replaced, if necessary.
If you hear “Please change batteries”
Replace the batteries in the BT In Touch 2000 as soon
as possible. 6 x AA Alkaline batteries are required,
see
‘Install the batteries’
on page 5.
If you hear “Telephone line disconnected”
Check that the BT In Touch telephone line cord is
still connected to the socket. If disconnected, then
reconnect it immediately (see page 5). If the
telephone line cord is still connected, then a line
fault has occurred and you will need to contact your
network service provider (for example, BT) as soon
as possible.
PRESS STORE TO
RESTORE TO DEFAULT
To delete your personal emergency
announcement
Lift the label surrounding the Quickdial
memory buttons to reveal the
Announce
and
Setup
buttons.
You can revert to the original BT
pre-recorded announcement as follows:
Press the
Store
button.
Press the
Announce
button.
The display shows:
Press the
Store
button.
Your BT In Touch 2000 will play back
“Your emergency announcement is...”
and
then the original pre-recorded emergency
announcement.
Setup
Announce
Store
Announce
Store