Available features may vary. Deployed features are based
on the original order and the system administrator’s
requests for each deployment. Please contact your system
administrator or Telesystem directly to discuss any
additions to the system.
Call Handling Basics
Place a call
Input the phone number or extension then press the green
Send
button.
For internal extensions, use the extension. For external calls, dial the 10-digit
phone number (no need to dial a 1 for long distance).
Answer a call
When phone is idle:
Press the green
Send
button or
Speaker
button to answer a call.
While already on a phone call:
You will hear a call waiting ‘beep’ and see the caller ID of the second caller while
already on a phone call. To answer the second call, press the green
Send
button.
The first call will go on hold automatically.
To switch between the held and active call, press the
Swap
soft key.
End a call
Press the red
End
button.
Mute
Press the
Mute
button to turn mute on or off during a call.
Hold
To place a call on hold:
Press
Options
soft key then use navigational buttons to select
Hold
.
To resume a held call:
Press
Options
soft key then use navigational buttons to select
Resume
.
Soft Keys:
The function of
these keys will show on
the dynamic screen above
each.
Speaker button:
turn
speaker audio on or off
Navigational buttons: Use
the
arrows and OK keys
when selecting an option or
scrolling through a list.
While not on a call, the up
and down arrow change
ringer volume.
End button:
hangs up call
or cancels current
operation. Press and hold
to power handset on/off.
Send button:
use to place
or answer a call.
Mute
: mute or unmute
microphone
Redial:
immediately
dials the last outbound
call
