BT In Touch 2000 ~ Edition 03 ~ 01.03.05 ~ 6692
26
To set the contrast of the display
Lift the Quickdial memory label to reveal
the
Setup
button.
Press the
Setup
button.
Then press the 2-digit code to change the
relevant setting:
30
Contrast level 1.
31
Contrast level 2.
32
Contrast level 3 (default setting).
33
Contrast level 4.
34
Contrast level 5.
Then press the
Setup
button to confirm the
setting.
Display contrast control
Adjust the contrast of the display to your preferred
level.
Setup
Setup
Setup
Announce
11
The emergency cancel timer is set
to a 9-second delay. The display
will show:
Then press the
Setup
button to confirm the
setting.
1 SECOND DELAY
SETUP
9 SECOND DELAY
SETUP
Setup
If you press the
M1
button,
“Dialling
memory one”
will be announced.
(Only if emergency status has been given
|to that Quickdial memory).
01
Optional voice prompts OFF.
(Default setting). Display will show:
Then press the
Setup
button to confirm
the setting.
Emergency cancel timer
The emergency cancel timer is the time the phone
takes to start the emergency sequence after you
press the
Emergency
button (on the phone or
Pendant). The time can be changed from one to nine
seconds in order to help you test your BT In Touch
Pendant.
VOICE OFF
SET UP
To set the emergency cancel timer
Lift the Quickdial memory label to reveal
the
Setup
button.
Press the
Setup
button.
Then press the 2-digit code to change the
relevant setting:
10
The emergency cancel timer is set
to a 1-second delay (the default
setting.) The display will show:
1 SECOND DELAY
SETUP
Setup
Announce
Setup