BT In Touch 2000 ~ Edition 03 ~ 01.03.05 ~ 6692
25
To set the voice prompts to ON or OFF
Lift the Quickdial memory label to reveal
the
Setup
button.
Press the
Setup
button.
Then press the 2-digit code to change the
relevant setting:
00
Optional voice prompts ON.
Display will show:
With voice prompts set to ON, the following
are examples of what you can expect to
hear:
If you press the
1
button,
“One”
will be
announced.
Setup
Announce
Setup
VOICE ON
SET UP
Optional settings of the
BT In Touch 2000
You can use the
Setup
button, located under the
memory label, to set and change the optional feature
settings.
Voice prompts
When you set voice prompts to ON, your
BT In Touch 2000 will confirm each numeric key
press with an announcement.
For example, if you press
7
you will hear
“Seven”
.
Cancelling an emergency call at the
BT In Touch 2000
Press
and hold down
the
Cancel
button until the
emergency light stops flashing and beeping.
The caller will hear a double beep to confirm the
emergency sequence has been cancelled.
Someone else is using the telephone
line in the caller’s home in the event
of an emergency
If the caller presses the
Emergency
button (phone/
pendant) but another person is already using the
telephone line, the BT In Touch 2000 will announce
over the loudspeaker and down the telephone line
“Emergency call. Please hang up now”
.
The BT In Touch 2000 will then wait a few seconds
and try to start the emergency sequence. If the
person on the telephone line has failed to hang up,
the BT In Touch 2000 will replay the message
“Emergency call. Please hang up now”
.
The BT In Touch 2000 will continue to do this until
the telephone line is clear and the emergency
sequence has begun.
Cancel