BT Featurephone, Руководство пользователя

Страница: 27 / 53

Class 5 and 6
Codes in Class 5 are codes entered in Table 5 which when
combined with Classes 2 and 3 are additional codes
which are allowed to be dialled in the combined class.
Codes in Class 6 are codes entered in Table 6 which
combined with Classes 1, 2 and 3 are additional codes
which are restricted in the combined class.
Each Table can be programmed with 50 codes.
It should be noted that both Classes 5 and 6, can be
associated with the same extension.
●
From the programming position, press the phone
set up key P and select ‘System programming’
●
Enter the PIN and select ‘System’
●
Select ‘Class codes’
●
Select the Table
●
Select an index number, 01-50, and enter the number
●
Press HANDS FREE to finish programming.
System speed dial numbers –
Class of service override
You may wish to allow restricted extensions to dial
numbers, entered in the system speed dialling list,
which they cannot dial directly, for example, these
could be particular numbers which extensions in
Classes 2, 3 or 4 cannot dial directly. By entering these
numbers into the system speed dialling list and
programming the extensions for this feature, the
restricted extensions can access these numbers.
In default, no extensions are programmed for this
feature.
●
From the programming position, press the phone
set up key
P
and select ‘System programming’
●
Enter the PIN, and select ‘Extensions’
●
Select ‘Sys. Speed no. override’
●
Enter the extensions to be programmed. Those
extensions allowed to dial the speed dial numbers
not normally appropriate to their class are indicated
with a solid diamond.
●
Press HANDS FREE to finish programming.
27