background image

FIVE YEAR MAJOR COMPONENTS WARRANTY

TWO YEAR LIMITED WARRANTY

for 

Bruno Stairlifts

Bruno Independent Living Aids, Inc. (“Bruno”), warrants to the original purchaser of a 

Bruno Stairlift that the Bruno Stairlift is free from defects in material and workmanship 

for a period of two years from date of purchase.  In addition, Bruno warrants that the 

motor, gear box and rail (the “Major Components”) will be free from defects in materials 

and workmanship for a period of five years from the date of purchase.

The exclusive remedy for a defect in a Bruno Stairlift shall be the repair or replacement, 

at the option of Bruno, of the defective part or component. After the first 30 days of this 

warranty, only parts and components are covered. This warranty does not cover labor 

and other services after the initial 30 days. If repair or replacement of a Bruno Stairlift 

is not commercially practical or cannot be timely made, Bruno may elect to refund the 

purchase price of the Bruno Stairlift instead of repairing or replacing the Bruno Stairlift.

IN NO EVENT SHALL BRUNO BE RESPONSIBLE FOR INDIRECT, INCIDENTAL OR 

CONSEQUENTIAL DAMAGES, WHETHER SUCH DAMAGES ARISE FROM CLAIMS 

BASED ON CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT 

LIABILITY OR  PRODUCT LIABILITY. 

Some states do not allow the exclusion or  

limitation of incidental or consequential damages, so the above limitation or exclusion 

may not apply to you.

ALL IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY 

OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN THEIR DURATION 

TO THE LENGTH OF THE WARRANTY STATED ABOVE FOR THE AFFECTED  

COMPONENT. 

Some states do not allow limitations on how long an implied warranty 

lasts so the above limitation may not apply to you.

 

To obtain warranty service, you must follow these procedures:

 

 

1. 

Obtain return authorization by calling your local Bruno dealer;

 

2. 

 Return the Bruno Stairlift, freight prepaid, to the address provided by your 

Bruno dealer or Bruno with proof of purchase indicating the date purchased.

Bruno will pay for shipping back to the purchaser within the continental United States 

and Canada if a defect in material or workmanship is discovered. Return freight and 

repair charges will be the responsibility of the purchaser if the problem is not covered by 

warranty.

 

This warranty does not cover damage or failure caused by misuse, abuse, accidents, 

physical damage, modifications not made by Bruno, damage in shipment, or repairs 

 

undertaken by anyone other than Bruno factory employees or authorized distributors. 

The “original purchaser” of a Bruno Stairlift that is leased or rented shall be the person 

or entity acting as the lessee or rental provider.

This warranty gives you specific legal rights, and you may also have other rights which 

vary from state to state. Bruno specifically does not authorize any person to extend the 

time or scope of this warranty.

For further information regarding this limited warranty, please contact Bruno by calling 

1-800-882-8183 or writing to Bruno at the following address:

 

 

 

 

 

 

Bruno Independent Living Aids, Inc.

 

 

 

 

Attention: Service Department

 

 

 

 

1780 Executive Drive, Post Office Box 84

 

 

 

 

Oconomowoc, WI 53066 USA

Содержание ELECTRA-RIDE II













































Отзывы:

Похожие инструкции для ELECTRA-RIDE II