15
©2009,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-1550 02-09-2009
5. Connect the charger power cord to the
nearest wall or floor outlet.
6. Connect the charger wiring harness to
the elevator power cable.
7. Bundle together loose wires.
8. Turn ON the charger power switch.
NOTES:
• The charger should be plugged
into a
household outlet all of the time.
• The elevator is design
ed so that the
batteries will be charged when the
carriage is at either end of the rail.
•
It is imperative that the carriage be
“parked” at the end of the rail when
it is not in use to maintain full battery
charge.
•
If the stairway elevator cannot be
parked at one end of the rail (for
example, on stairways with a door
at the top), use the remote call/send
transmitter to send the carriage to the
other end. In this way, the carriage will
properly engage the charging contacts,
ensuring that the batteries will remain
fully charged.
+
elevator
power cable
elevator charge
bumper
elevator charge
bumper
charger
power cord
connect charger
wiring harness
to elevator
power cable
charger power switch
INSTALLATION
