Bruker CounterTop XRF Скачать руководство пользователя страница 52

Страница: 52 / 67

S1 TITAN, T

RACER

5, and CTX User Manual

030.0112.04.0

52 of 67

10. Edit Info Button

Description

Before a measurement is taken, an assay can be named and described. This information is saved
to the Results.csv file and the <index>-<Application>.pdz (e.g., 00456-Alloys.pdz) spectrum file.

Sample ID

Whatever is entered in the first field under

Value

is what is displayed in the

Sample ID

field in

Results (and the

Name

field in

Report Generator

Bruker Instrument Tools). If

Operator

is the

first value, then the second value is used for

Sample ID

File List

More than one source file may be available with different or additional

Field Names

To access additional source files

, tap the downward pointing arrow to the right of the

File List

field. A dropdown list is displayed. Tap a selection.

Labeling an
assay

To label subsequent assays –

Step

Action

Result

From the

Ready to Test

screen,

tap the

Edit Info

button.

The

Sample ID Fields

screen is displayed.

Double tap a field under

Value

A keyboard is displayed.

Enter appropriate information.

The field reflects the change.

Tap

The keyboard is removed and information is saved
in the field.

Repeat steps 2 - 4 as necessary.

To save changes to the

Sample ID

Fields

screen, tap

The

Ready to Test

screen is displayed and

subsequent assays are labeled accordingly until
these settings are changed.

*List option

If the

List

checkbox, available in Supervisor Mode, is checked for the applicable

Field

Name

, when

a field under

Value

is tapped once, a dropdown list is displayed, rather than a keyboard. Select

from the list or

<Add New>

, as described below.

Your Complete Source for

Testing Equipment

www.BergEng.com

Berg Engineering & Sales Company, Inc.

1-847-577-3980

[email protected]

Содержание CounterTop XRF




































































Результаты поиска

Содержание CounterTop XRF

Отзывы:

Похожие инструкции для CounterTop XRF

Бренды по названию

Популярные бренды

Bruker CounterTop XRF, Руководство пользователя

Результаты поиска

Содержание CounterTop XRF

Отзывы:

Похожие инструкции для CounterTop XRF

Бренды по названию

Популярные бренды