Brüel & Kjær Vibro VIBROTEST 60, Техническая документация инструкция

Страница: 24 / 172

Introduction VIBROTEST 60
Page 20 of 168 C102 853.002 © VTEST60E July 2013 4.46ff
2.5.2 Cursor buttons , , ,
Depending on the menu being displayed, various functions can
be performed in connection with the cursor position.
Cursor display with FFT-, Envelope
Analysis and CPB-spectra
The cursor can be moved along the X-axis
using the cursor control buttons.
The value corresponding to the position of
the cursor is displayed on the screen as a
numeric value.
Note:
The back-light is switched on by pushing any button. The
function of the respective button is also executed; because of
this it is better to use the cursor buttons for switching on the
back-light.
2.5.3 The function buttons
The function buttons located below the cursor control buttons
are assigned fixed functions as follows:
STORE Store the measurement on the PC-card. After a
measurement is completed the values can be stored
on the PC-card as a Report.
1 / 2 Switching the measurement display between the two
measuring channels (only in analyser mode and with
2-channel operation of the instrument).
This button has no influence on the measurement
function of the instrument.
The selected channel number is displayed on the
screen as shown in chapter 2.5.4.