Brother PE-DESIGN V7, Инструкция по эксплуатации

Страница: 201 / 361

195
Manually Creating Embroidery Patterns From Images (Design Center)
The functions for each button are described below.
1 Open Image File
Click this button to open a previously saved
image file and paste the image in the Design
Page.
c
For details, refer to “Importing image data
into Layout & Editing” on page 18.
2 From Clipboard
Clicking this button pastes the image on the
Clipboard into the Design Page. This function
can only be used when there is an image on the
Clipboard.
3 From TWAIN device
Click this button to import an image from a
TWAIN device (such as a scanner or digital
camera) connected to your computer, then
paste it in the Design Page.
c
For details, refer to “Importing image data
from a TWAIN device” below.
4 Use Current image
Click this button to use an image opened in the
Original Image Stage. This function can only be
used when an image is opened in the Original
Image Stage.
5 Previous
Clicking this button closes the current dialog
box, and returns to the
How do you want to
produce embroidery? dialog box.
6 Cancel
Clicking this button closes this dialog box.
→
If any button other than Previous or
Cancel is clicked, the image will be
imported and pasted into the Design Page
of the Original Image Stage, and the
Cut
out to Line Image dialog box appears,
allowing you to choose colors for outlines.
c
For details on the next stages, refer to
“Line Image Stage” on page 196, “Figure
Handle Stage” on page 199, then “Sew
Setting Stage” on page 209.
Importing image data from
a TWAIN device
TWAIN is an application interface (API)
standardization for software that controls scanners
and other devices. Design Center supports TWAIN
standardized devices, allowing you to control the
device and import the image directly.
1.
Check that the scanner or other TWAIN
device is correctly connected to your
computer.
2.
Click File , then Select TWAIN device .
→
The Select Source dialog box appears.
3.
From the Sources list, click the desired device
to select it.
4.
Click Select to choose the selected device
and to close the dialog box.
5.
Click File , then Input from TWAIN device .
→
The driver interface for the device
selected in the
Select Source dialog box
appears.
6.
Specify the necessary settings for importing
an image, and then import the image.
→
When the image transfer between the
scanner (or other device) and the driver is
completed, the imported image will be
pasted in a Design Page of the Original
Image Stage.
a
Note:
If no TWAIN device is installed, there will be
no names displayed in the
Sources list.
First, install the driver software for the
TWAIN device that you want to use.
b
Memo:
To quit the operation and close the dialog box,
click
Cancel .
a
Note:
For information on using the driver interface,
refer to the help manual for that interface, or
contact the manufacturer of the interface.
b
Memo:
If the image currently displayed in the Design
Page has not yet been saved, you will be
asked whether you want to save it.
!!
scr94.bmp
!!