Brother Innov-is NX600, Руководство по обслуживанию

Страница: 95 / 214

3 - 19
Thread tension mechanism Main unit
Assembly
4
Tension disk attachment
1. Attach tension disc A
1
, tension disc B
2
, a washer
3
, thread tension
plate A
4
, the tension disc washer
5
, washer
3
, spring and tension
adjusting screw
6
to the thread tension disk shaft.
2. Attach the tension plate assy.
7
to the thread tension gear shaft, and screw
the tension adjusting screw
6
into the tension plate assy.
*Key point
• The tension adjusting screw
6
should be screwed in so that
the tip protrudes approximately 0.5 mm from the right of the
tension plate assy.
7
.
3. Attach the rubber
8
to the initial adjusting plate
9
.
4. Install screw
1
into the initial adjusting plate
9
.
Start movie clip (CD-ROM version only)
1
Torque
0.78 – 1.18 N·m
S05
7
9
1
3
$
S05
6 5 4
2 1
8
S05
Screw, Bind
M 3X4
Color; Silver
12.5
6.9
THREAD TENSION SPRING
XA9900***
5
AT pulse motor attachment.
1. Attach the AT pulse motor
1
using
1
(two).
1
Torque
0.78 – 1.18 N·m
1
1
Screw, Bind
M 3X4
Color; Silver