Brother Innov-is NX600, Руководство по обслуживанию

Страница: 110 / 214

3 - 34
Main parts Main unit
1
Handle assembly and attachment
1. Attach the handle, handle holder and polyester slider to the handle shafts,
and attach retaining rings E4 (two).
2. Attach the handle to the arm bed using the screws
1
(two).
Start movie clip (CD-ROM version only)
1
Torque
1.47 – 1.96 N·m
Retaining ring E4
1
Taptite, Bind S
M 4X10
Color; Gold
2
Rear cover attachment
1. Lower the presser foot lifter and pull the power cord out approximately 20
cm.
2. Attach the rear cover.
*Key point
• First insert the rear cover hook
1
into the base plate.
3. Secure the rear cover to the arm bed with the screw
1
.
Start movie clip (CD-ROM version only)
1
Torque
0.78 – 1.18 N·m
1
1
Screw, Bind
M 4X8
Color; Silver
3
Front cover assembly (SV keytop attachment)
1. Attach the SV joint plate
1
to the speed control key part of the front cover.
2. Attach the SV keytop
2
to the SV joint plate
1
.
Start movie clip (CD-ROM version only)
2
1