Brother Innov-is NX600, Руководство по обслуживанию

Страница: 23 / 214

2 - 3
Main parts Main unit
Disassembly
1
Accessory table removal
1. Remove accessory table
1
.
2. Remove the accessory table door from the accessory table
1
.
1
2
Top cover removal
1. Remove top cover
1
.
*Key point
• Push the attached part toward the inside and remove.
1
3
Face plate removal and disassembly
1. Remove the screw
1
, and remove the face plate
1
.
2. Remove the needle thread lever knob
2
.
3. Remove the CS5 retaining ring
3
and remove the NT lower thread cutter
4
.
4. Remove the screw
2
and the screw
3
, and remove the shaft presser plate
and washer
5
.
5. Remove .
6. Remove the needle thread lever shaft
6
.
7. Remove the needle thread lever
7
from the needle thread lever shaft
6
,
and remove the rubber washer.
Start movie clip (CD-ROM version only)
1
2
5 7
6 3
1
S01
4 3
2
S01