Brother Innov-is NX600, Руководство по обслуживанию

Страница: 151 / 214

3 - 75
Thread cutter module Modules
Assembly
1
C pulse motor attachment.
1. Attach the C pulse motor (ZPMM35SP-9N)
1
to the motor holder assy.
2
using the screws
1
(two).
2. Lubricate the C pulse motor
1
bearing with 1 – 2 drops of
turbine oil # 100.
Start movie clip (CD-ROM version only)
Lubricate the CPM bearing with turbine oil #100. 1 – 2 drops
1
Torque
0.78 – 1.18 N·m
2 1
1
Screw, Bind
M 3X4
Color; Silver
2
Idle gears A and B attachment
1. Apply a small amount of Epnoc Grease AP to the idle gear shaft
1
.
2. Attach idle gear A
2
, the spring
3
and idle gear B
4
to the idle gear shaft
1
, and attach retaining ring E2.
*Key point
• Insert the spring
3
into the small holes
5
in idle gear A
2
and idle gear B 4 , and turn idle gear A 2 clockwise until the
large holes
6
in idle gear A
2
and idle gear B
4
overlap
7
.
• With the large holes 6 aligned 7 , align the match mark 8 on
the idle gear assy. and the match mark
9
on the C pulse
motor gear, and attach the idle gear assy. to 1 .
Start movie clip (CD-ROM version only)
Apply Epnoc Grease AP to the lever guide shaft Small amount
2
8
6
3 4 5
7 1
9
Retaining ring E2