Brother Innov-is NX600, Руководство по обслуживанию

Страница: 105 / 214

3 - 29
Electrical parts and motors Main unit
Assembly
11
Base plate attachment
1. Attach the base plate assembly
1
to the arm bed using the screws
1
(three).
*Key point
• Pull the power cord approximately 5 cm out of the cord reel
assembly.
Start movie clip (CD-ROM version only)
1
Torque
1.47 – 1.96 N·m
1 1
Taptite, Bind S
M 4X10
Color; Gold
12
Wire assy. and knee lifter assy. attachment
1. Attach the fitting
1
on the end of the wire assy. (side with two M8 nuts on
it) to the wire holder
2
on the knee lifter assy., and hand tighten the M8
nut
3
on the lower side.
(Fully tighten after 4 - 21 "Knee lifter adjustment.")
2. Attach the hook
4
on the end of the wire assy. to the knee lifter assy. shaft,
and attach retaining ring E3.
1
3
2
3
4
13
Power supply unit F attachment
1. Attach power supply unit F
1
to the arm bed using the screws
1
(three).
2. Attach the connector
2
for the inlet assy. to the power supply unit F.
Start movie clip (CD-ROM version only)
1
Torque
0.78 – 1.18 N·m
2
3
1
1
Screw, Pan (S/P washer)
M4X14
Color; Silver