7-6
Confidential
Press the [Go] button twice.
Press the [Go] button again depending on the necessary number of times after check
that
Toner/Drum/Paper
LEDs are lighted.
Press the [Go] button three times.
Press the [Go] button again depending on the necessary number of times after check
that
Toner/Drum/Paper
LEDs are lighted.
Press the [Go] button more than 2 seconds (long push).
Check that
Paper
LED is lighted.
Press the [Go] button
Mode
Once
* Start printing when close the front cover.
Twice
18) Maint Test pattern with margin frame
(HL-5340 is the print test)
* Start printing when close the front cover.
Three times
(HL-5380DN is the print test)
* Start printing when close the front cover.
Four times
20) Sleep Mode Setting (ON/OFF)
* Check that all LEDs are lighted for one second.
Five times
Ineffective
Six times
21) Developer Roller Counter Reset 2
(For the standard toner cartridge)
* Check that all LEDs are lighted for one second.
Seven times
21) Developer Roller Counter Reset 3
(For the high-capacity toner cartridge)
* Check that all LEDs are lighted for one second.
Eight times
Nine times
23) USB Speed Indication (ON/OFF)
Ten times
24) Sleep Mode Indication (OFF/Dimmed)
More than 11 times
Go back to Normal State
Press the [Go] button
Mode
One to eight times,
ten to 12 times
Factory use
Nine times
25) Inspection Mode Cle Inspection Mode
PIT3 Inspection Mode
* Factory use.
CAUTION;
• Each mode starts 2 seconds after pressing the [Go] button.
• If the [Go] button is pressed, the
Status
LED is lighted. If the [Go] button is
released, the LED is out.
Содержание HL 5370DW
