7-5
Confidential
1.3
Service Mode
The service mode is exclusively designed for the purpose of checks, settings and
adjustments, and this function should be accessed by service personnel only. You can
perform a print test and display the log information.
<Procedure>
<LED model>
(1) Check that the front cover is open.
(2) Turn ON the power switch while the [Go] button is held.
(3) After all LEDs on the panel are lit, only the
Status
LED goes out.
(4) Release the [Go] button and check that all LEDs are out.
(5) Press the [Go] button once or twice. (If the [Go] button is pressed, the
Status
LED is lit.
If the [Go] button is released, the LED is out.)
(6) Check that
Toner/Drum/Paper
LEDs are lighted.
(7) Press the [Go] button depending on the necessary number of times. Each mode starts
after 2 seconds. (If the [Go] button is pressed, the
Status
LED is lit. If the [Go] button is
released, the LED is out.)
<LCD model>
(1) Check that the front cover is open.
(2) Turn ON the power switch while the [Go] button is held.
(3) The message “
USERS MODE
” is shown on the LCD panel.
(4) Release the [Go] button and check that the
Data
LED is out. (Backlight is green.)
(5) Press the [Go] button once or twice. (If the [Go] button is pressed, the
Data
LED is lit. If
the [Go] button is released, the LED is out.)
(6) Check that the message “
USERS MODE
” is shown on the LCD panel with orange backlight.
(7) Press the [Go] button depending on the necessary number of times. Each mode starts
after 2 seconds. (If the [Go] button is pressed, the
Data
LED is lit. If the [Go] button is
released, the LED is out.
Press the [Go] button once.
Press the [Go] button again depending on the necessary number of times after check
that
Toner/Drum/Paper
LEDs are lighted.
Press the [Go] button
Mode
Once
Twice
10) Continuous Grid Pattern Print Mode
Three times
Four times
Five times
Six times
Seven times
Eight times
16) Paper Size Setting (A4/Letter)
Nine times
More than Ten times
Go back to Normal State
Содержание HL 5370DW
