manualshive.com logo in svg

Brother HL-2700CN Series, Руководство по обслуживанию, Страница: 322 / 377

Поделиться
Скачать
Brother HL-2700CN Series Скачать руководство пользователя страница 322

 

VIII-65

 

I-5 

Wrinkle / Image Migration 

 
Phenomenon 
Banding shadows of different optical density appear due to the wrinkle, image migration 

and color misregistration occurring on the print paper as shown in 

print sample (5) of 

Fig.8-2

. 

 
Main Causes 
1)  Paper in use is not a recommended paper, or is an abandoned paper. 
2)  The rear cover ASSY PU is not locked properly. 
3)  Fuser roller is deformed or reaches to the end of life. 
4)  One side of fuser unit FU is lifted when installed. 

 

 
Countermeasures 
1)  Use a recommended paper or fresh paper from a paper bag. 
2)  Push the rear cover ASSY PU and ensure the locking at the both sides (left and 

right). 

3)  Confirm that the fuser unit FU is installed properly and fixed with the lock lever lock 

lever of the left and right. 

4)  Replace the fuser unit FU with a new unit FU. 
 

Содержание HL-2700CN Series


























































































































































































































































































































































































Отзывы:

Нет отзывов