manualshive.com logo in svg

Brother HL-1020, Руководство по обслуживанию

Брат HL-1020 - это надежный и эффективный принтер. Для тех, кто ищет сервисный мануал или руководство по эксплуатации, предлагаем бесплатное скачивание с manualshive.com. Настройте свой принтер для оптимальной производительности, используя наше руководство.

Поделиться
Скачать
background image

I-2

Low Running Cost

The toner cartridge is separate from the drum unit.  You need to replace only the toner
cartridge after around 2,400 pages, which is cost effective and ecologically friendly.

The actual number of pages printed with each toner cartridge may vary depending on
your average type of print job.

  Enhanced Memory Management

The printer provides its own data compression technology in its printer hardware and the
supplied printer driver software, which can automatically compress graphic data and font
data efficiently into the printer's memory.  You can avoid memory errors and print most
full page 600dpi graphic and text data, including large fonts, with the standard printer
memory.

  Remote Printer Console Program for DOS (for HL-1040/1050 only)

The utility program, Remote Printer Console (RPC), is available on the floppy disk and
CD-ROM supplied with your printer.  When you operate your computer in the DOS (Disk
Operating System) environment, this program allows you to easily change the default
settings of the printer such as fonts, page setup, emulations and so on.

This program also provides a status monitor program, which is a Terminate-and-Stay
Resident (TSR) program.  It can monitor the printer status while running in the
background and report the current status or errors on your computer screen.

  Popular Printer Emulation Support (for HL-1040/1050 only)

These printers support the following printer emulation modes;
The HL-1040 supports HP LaserJet IIP, Epson FX-850, and IBM Proprinter XL
The HL-1050 supports HP LaserJet 6P/6L, Epson FX-850 and IBM Proprinter XL.

When you use DOS application software or Windows™ version 3.0 or earlier, you can
use any of these emulations to operate the printer in the 300 dpi resolution mode.  The
printers also support Auto-emulation switching between HP and Epson or HP and IBM.  If
you want to set the printer emulation, you can do it using the Remote Printer Console
Program.

  USB Interface (for HL-1050 only)

The Universal Serial Bus Interface is an interface which allows the printer to connect to
multiple peripheral devices.

  High Resolution Control & Advanced Photoscale Technology (for HL-1050 only)

High resolution control (HRC) technology provides clear and crisp printouts.  Use this
function to get smooth text print quality.
Advanced Photoscale Technology enables the printer to print graphics in 256 grayscales,
producing nearly photographic quality.  Use this function when you want to print
photographic images.

  Optional Apple Macintosh

®

 Interface (for HL-1040/1050 only)

An optional Apple Macintosh serial interface is available which allows your printer to be
connected to Apple Macintosh computers.  With this option, you can use your printer with
both an IBM PC (or compatible) and an Apple Macintosh at the same time.  This optional
interface board can be used as an RS-422A interface for Macintosh or an RS-232C serial
interface for an IBM PC or compatible.

Содержание HL-1020


















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HL-1020

Samsung CLP-36 Series Manual preview
CLP-36 Series
Бренд: Samsung Страницы: 9
Samsung Bixolon SRP-500 Command Manual preview
Bixolon SRP-500
Бренд: Samsung Страницы: 27
Samsung 550N - CLP Color Laser Printer User Manual preview
550N - CLP Color Laser Printer
Бренд: Samsung Страницы: 288
Samsung 2 COLOR THERMAL PRINTER SRP-275 Quick Reference Manual preview
2 COLOR THERMAL PRINTER SRP-275
Бренд: Samsung Страницы: 8
Samsung CLP-300 Brochure & Specs preview
CLP-300
Бренд: Samsung Страницы: 6
Samsung CLP-300 User Manual preview
CLP-300
Бренд: Samsung Страницы: 91
MakerBot Replicator+ Reference Manual preview
Replicator+
Бренд: MakerBot Страницы: 48
Oki C931dn Manuel D'Utilisation preview
C931dn
Бренд: Oki Страницы: 320
Ricoh AP-P2 G188 Field Service Manual preview
AP-P2 G188
Бренд: Ricoh Страницы: 682
KIP KIP 7000 Parts Manual preview
KIP 7000
Бренд: KIP Страницы: 103
Xerox 3600DN - Phaser B/W Laser Printer Installation Instructions preview
3600DN - Phaser B/W Laser Printer
Бренд: Xerox Страницы: 2
Kyocera KM-1820 Quick Start Manual preview
KM-1820
Бренд: Kyocera Страницы: 2
Oki C542 Advanced Manual preview
C542
Бренд: Oki Страницы: 255
Oki MB451wMFP User Manual preview
MB451wMFP
Бренд: Oki Страницы: 198
SEWOO LK-T200 User Manual preview
LK-T200
Бренд: SEWOO Страницы: 13
Kyocera FS-1118MFP Installation Manual preview
FS-1118MFP
Бренд: Kyocera Страницы: 2
Riso HC5500T User Manual preview
HC5500T
Бренд: Riso Страницы: 66
Mayku Multiplier Quick Start Manual preview
Multiplier
Бренд: Mayku Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды