manualshive.com logo in svg

Brother HL-1020, Руководство по обслуживанию, Страница: 176 / 305

Поделиться
Скачать
Brother HL-1020 Скачать руководство пользователя страница 176

- 2 -

Action 1: Check the Supplied Items

After taking the printer out of the carton and removing the packing materials, make sure that
the following items are not damaged and none are missing:

• Printer

• Paper support

• Drum unit assembly (with Toner cartridge

included)

• AC Cord

3.5” floppy disks for Windows® printer driver and fonts

Quick setup guide (this guidebook)

Plastic Bag

CD-ROM

✒

 

NOTE

The 3.5” floppy disks for the Macintosh printer driver may be included for some countries.
You will need to purchase an interface cable that matches the bi-directional IEEE 1284
compliant interface of your computer. If you do not know what cable you need, consult your
dealer.

Содержание HL-1020


















































































































































































































































































































Отзывы:

Нет отзывов