manualshive.com logo in svg

Brother HL-1020, Руководство по обслуживанию

Брат HL-1020 - это надежный и эффективный принтер. Для тех, кто ищет сервисный мануал или руководство по эксплуатации, предлагаем бесплатное скачивание с manualshive.com. Настройте свой принтер для оптимальной производительности, используя наше руководство.

Поделиться
Скачать
background image

USER’S GUIDE

6-14

Print Quality

!

Caution

You will clear a print quality problem by replacing the drum unit with a
new one if the 

Drum

 lamp is on. The drum unit is at the end of its life.

Question Recommendation
Printed pages contain white
stripes.

Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Flat-top ,he come. Lucy in the sky with Diamonde. AA 

One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,heAA 

come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top 

,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-

top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Lucy in the 

sky with Diamonde. Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be 

free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you goA 

to be free. Come together right now, over me.  Here come Flat-top ,he come. Lucy in the sky with AAAAA 

Diamonde. One thing I can tell you is you go to be free. Come together right now, over me.  Here come  A 

Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  HereA 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over me. A 

Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Flat-top ,he come. Lucy in the sky with Diamonde. One thing I can tell you is you go 

to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you 

go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is 

you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell A 

you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can 

tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I 

can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One A 

thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. 

One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he A 

come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top 

,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-

top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Flat-top ,he come. Lucy in the sky with Diamonde. One thing I can tell you is you go to be free. Come AAA 

Fig. 6-7 White Stripes or Faint

Images

You may clear the problem by wiping the scanner
windows with a soft cloth. (

See “Cleaning the printer

interior and Drum unit.” in Chapter 5

.)

If the same problem occurs and the 

Drum

 lamp is

still on after cleaning, replace the drum unit with a
new one.

Printed pages are stained with
toner or have vertical stripes.

Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Flat-top ,he come. Lucy in the sky with Diamonde. AA 

One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,heAA 

come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top 

,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-

top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Lucy in the 

sky with Diamonde. Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be 

free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you goA 

to be free. Come together right now, over me.  Here come Flat-top ,he come. Lucy in the sky with AAAAA 

Diamonde. One thing I can tell you is you go to be free. Come together right now, over me.  Here come  A 

Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  HereA 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over me. A 

Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Flat-top ,he come. Lucy in the sky with Diamonde. One thing I can tell you is you go 

to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you 

go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is 

you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell A 

you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can 

tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I 

can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One A 

thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. 

One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he A 

come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top 

,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-

top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Flat-top ,he come. Lucy in the sky with Diamonde. One thing I can tell you is you go to be free. Come AAA 

Fig. 6-8 Dark Stripes or Toner

Stains

 Clean the printer interior and the primary corona

wire of the toner cartridge. 

See “Cleaning the

Printer Interior and Drum Unit” in Chapter 5

.

 Make sure that the tab of the corona wire is at the

home position.

If the same print problem occurs and the 

Drum

 lamp

is still on after cleaning, replace the drum unit with a
new one.

Printed pages have white spots
in black text and graphics area.

Fig. 6-9 White Spots

Make sure that you use paper that meets the
specifications. Rough surface or thick media can
cause the problem.

If you still have the same problem and the 

Drum

lamp is on, replace the drum unit with a new one.

Содержание HL-1020


















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HL-1020

Xerox 665 User Manual preview
665
Бренд: Xerox Страницы: 89
Oki 86 Specifications preview
86
Бренд: Oki Страницы: 4
Nanoptix PayCheck Operator'S Manual preview
PayCheck
Бренд: Nanoptix Страницы: 25
Nanoptix EZ-Tear Cleaning Instructions preview
EZ-Tear
Бренд: Nanoptix Страницы: 4
Xerox Phaser 5335 Installation Manual preview
Phaser 5335
Бренд: Xerox Страницы: 2
Datamax MP-Compact4 Network Manual preview
MP-Compact4
Бренд: Datamax Страницы: 19
Canon PIXMA MG3120 Getting Started Manual preview
PIXMA MG3120
Бренд: Canon Страницы: 4
BIXOLON SRP-500 Driver Installation Manual preview
SRP-500
Бренд: BIXOLON Страницы: 31
JRC NKG-94 Instruction Manual preview
NKG-94
Бренд: JRC Страницы: 44
TEC B-370 Series Maintenance Manual preview
B-370 Series
Бренд: TEC Страницы: 89
Xerox VersaLink C405/N User Manual preview
VersaLink C405/N
Бренд: Xerox Страницы: 256
Cycjet ALT382 Manual preview
ALT382
Бренд: Cycjet Страницы: 26
FELIXrobotics FELIX 3.0 User Manual preview
FELIX 3.0
Бренд: FELIXrobotics Страницы: 65
Oki ES8140 User Manual preview
ES8140
Бренд: Oki Страницы: 83
Star Micronics NX-1001 User Manual preview
NX-1001
Бренд: Star Micronics Страницы: 130
Ricoh Pro C5300 Series Adjustment Settings For Operators preview
Pro C5300 Series
Бренд: Ricoh Страницы: 37
XYZ Printing PartPro300 xT User Manual preview
PartPro300 xT
Бренд: XYZ Printing Страницы: 33
DataMetrics 1980 Series Operation And Maintenance Manual preview
1980 Series
Бренд: DataMetrics Страницы: 35

Бренды по названию

Популярные бренды

Загрузить еще бренды