manualshive.com logo in svg

Brother HL-1020, Руководство по обслуживанию, Страница: 284 / 305

Поделиться
Скачать
Brother HL-1020 Скачать руководство пользователя страница 284

USER’S GUIDE

6-16

Question

Recommendation

Printed pages are blurred at the
center or either edge.

Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Pat-top  ,he come. Diamonde the skyLucy in  with . 

AA One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top 

,heAA come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  

in the sky Lucy Diamonde with . Here come Pat-top ,he come. One thing I can tell you is you go to be free. 

Come AAA together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to 

be free. A Come together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you 

go to be free.  together Comeright now, over me.  Here come Pat-top ,he come. One thing I can tell you is 

you goA to be free. Come together right now, over me.  Here come Pat-top ,he come. Lucy in the sky with 

AAAAA Diamonde. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  Here 

come  A Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over 

me.  HereA come Pat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right 

now, over me. A Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together 

right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come 

together right now, over me.  Here come v ,he come. Lucy Diamonde in the sky with . One thing I can tell 

you is you go to be free. Come tin the skyright now, over me.  Here come Pat-top ,he come. One thing I 

can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. One 

thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. 

One thing I can tell A you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he 

come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-

top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come 

Pat-top ,he come. One A thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  

Here come Pat-top ,he A come. One thing I can tell you is you go to be free. Come in the sky right now, 

over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky 

right now, over me.  Here come Pat-top ,he come. Lucy in the sky with Amesist. One thing I can tell you is 

Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Pat-top  ,he come. Diamonde the skyLucy in  with . 

AA One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top 

,heAA come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  

in the sky Lucy Diamonde with . Here come Pat-top ,he come. One thing I can tell you is you go to be free. 

Come AAA together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to 

be free. A Come together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you 

go to be free.  together Comeright now, over me.  Here come Pat-top ,he come. One thing I can tell you is 

you goA to be free. Come together right now, over me.  Here come Pat-top ,he come. Lucy in the sky with 

AAAAA Diamonde. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  Here 

come  A Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over 

me.  HereA come Pat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right 

now, over me. A Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together 

right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come 

together right now, over me.  Here come v ,he come. Lucy Diamonde in the sky with . One thing I can tell 

you is you go to be free. Come tin the skyright now, over me.  Here come Pat-top ,he come. One thing I 

can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. One 

thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. 

One thing I can tell A you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he 

come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-

top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come 

Pat-top ,he come. One A thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  

Here come Pat-top ,he A come. One thing I can tell you is you go to be free. Come in the sky right now, 

over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky 

right now, over me.  Here come Pat-top ,he come. Lucy in the sky with Amesist. One thing I can tell you is 

Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Pat-top  ,he come. Diamonde the skyLucy in  with . 

AA One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top 

,heAA come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  

in the sky Lucy Diamonde with . Here come Pat-top ,he come. One thing I can tell you is you go to be free. 

Come AAA together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to 

be free. A Come together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you 

go to be free.  together Comeright now, over me.  Here come Pat-top ,he come. One thing I can tell you is 

you goA to be free. Come together right now, over me.  Here come Pat-top ,he come. Lucy in the sky with 

AAAAA Diamonde. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  Here 

come  A Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over 

me.  HereA come Pat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right 

now, over me. A Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together 

right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come 

together right now, over me.  Here come v ,he come. Lucy Diamonde in the sky with . One thing I can tell 

you is you go to be free. Come tin the skyright now, over me.  Here come Pat-top ,he come. One thing I 

can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. One 

thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. 

One thing I can tell A you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he 

come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-

top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come 

Pat-top ,he come. One A thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  

Here come Pat-top ,he A come. One thing I can tell you is you go to be free. Come in the sky right now, 

over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky 

right now, over me.  Here come Pat-top ,he come. Lucy in the sky with Amesist. One thing I can tell you is 

Fig. 6-14 Blurred Page

Certain environmental conditions such as humidity,
high temperatures, etc. may cause this situation to
occur.
 Make sure that the printer is placed on a flat,

horizontal surface.

 Remove the drum unit with the toner cartridge

installed. Try shaking them from side to side.

 You may clear the problem by wiping the scanner

windows with a soft cloth. (

See “Cleaning the

Printer Interior and Drum Unit.”

)

      If the same problem occurs after cleaning and

Drum

 lamp is still on, replace the drum unit with

a new one.

Ghost images show up on
printed pages.

Fig. 6-15 Ghost Images

 Make sure that you use paper that meets the

specifications. Rough surface or thick media can
cause the problem.

 Make sure that you select the appropriate media

type in the pritner driver.

✒

Note

The drum unit is a consumable, and it is necessary to replace it
periodically.

Содержание HL-1020


















































































































































































































































































































Отзывы:

Нет отзывов