manualshive.com logo in svg

Brother HL-1020, Руководство по обслуживанию, Страница: 248 / 305

Поделиться
Скачать
Brother HL-1020 Скачать руководство пользователя страница 248

CHAPTER 4 OPTIONS

4-5

You can connect a parallel and a serial interface cable at the same time.
The auto interface selection function allows you to share the printer with
two computers. To do this, connect the parallel interface cable and then
connect the serial interface cable as follows:

1. Make sure that the 

power

 switch is turned off.

!

Caution

Be sure to turn off the 

power

 switch before connecting or disconnecting

the interface cables, or the printer may be damaged.

2. Insert and secure the parallel interface connector into the parallel

interface port of your printer.

3. Insert and secure the serial interface connector into the serial interface

port of your printer.

4. Turn on the 

power

 switch.

Содержание HL-1020


















































































































































































































































































































Отзывы:

Нет отзывов