manualshive.com logo in svg

Brother HL-1020, Руководство по обслуживанию, Страница: 239 / 305

Поделиться
Скачать
Brother HL-1020 Скачать руководство пользователя страница 239

CHAPTER 2 PAPER HANDLING

2-11

OUTPUT TRAY AND PAPER SUPPORT WIRE

The printer ejects paper with printed surfaces face down into the output
tray at the front of the printer.

When the output tray is closed, the ejected paper comes out sheet by sheet
through the slit at the front. When you open the tray, sheets can be
stacked on the tray.

Follow these steps to open the output tray:

1. Pull the top of the tray down (

➀

).

2. Extend the extension support wire (

➁

).

Fig. 2-8 Opening the Output Tray and

Extending the Extension Support Wire

You can stack up to 100 sheets in the output tray.

!

Caution

 When you use transparencies, remove each sheet immediately after

printing. Stacking sheets may cause paper curled or paper jam.

 Continuous printing with the output tray closed may cause

condensation inside the output tray.

Содержание HL-1020


















































































































































































































































































































Отзывы:

Нет отзывов