Brother 882-W33, Руководство по эксплуатации

Страница: 50 / 216

UPPER THREADING
48
e
Push the spool cap onto the spool pin as far
as possible, then return the spool pin to its
original position.
f
While holding the thread with both hands,
pull the thread up from under the thread
guide plate.
a
Thread guide plate
g
While holding the thread in your right
hand, pass the thread through the thread
guide in the direction indicated.
h
Guide the thread down, up, then down
through the groove, as shown in the
illustration.
i
Pass the thread through the needle bar
thread guide (marked “6”) by holding the
thread with both hands and guiding it as
shown in the illustration.
a Needle bar thread guide
j
Pass the thread through the thread guide
disks (marked “7”). Make sure that the
thread passes through the groove in the
thread guide.
a
Groove in thread guide
CAUTION
• Choose a spool cap that best fits the size of
spool being used. For more information
regarding the choice of spool caps for your
thread choice, refer to “Note” on page 41.
If the spool or the spool cap is not positioned
correctly, the thread may become tangled
around the spool pin, possibly causing the
needle to break, resulting in injuries.
a
Memo
• Look in the upper groove area to check if the
thread catches on the thread take-up lever
visible inside the upper groove area.
a Look in the upper groove area
a
a